Kurth KE3600 DSL Multitester

---

De KE3600 xDSL Multitester is een snel, gebruiksvriendelijk en kosten effectieve multitester voor de installatie en probleem oplossing van DSL service in hybride ADSL 1/2/2 + /VDSL2 en gebundelde netwerken.

Met zijn variëteit aan interfaces voorziet het de gehele breedband netwerk technologie.

Kenmerken van de KE3600 xDSL Multitester

• 1 GbE Interface

• ADSL 1 tot ADSL 2+ Annex A/B/M/J

• VDSL 2 Annex A/B met vectoring profielen 8a/b/c/d, 12 a/b, 17a, 30a (alleen in combinatie met bonding)

• Modem- router en eindgebruiker modus

• incl tas, beproevingskabels, software en Nederlandse handleiding.

Complete specificaties:



Standards compliance



ADSL1/2/2+
ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M)
ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L)
ITU-T G.992.2 (G.Lite incl. Annex A, B, J)
ITU-T G.992.1 (G.DMT incl. Annex A, B, J)
ATIS/ANSI T1.413 Issue 2
IEEE 802.3ah (PTM)
ITU-T G.998.1/2/3 (Bonding)*

VDSL2
ITU-T G.993.2 Annex A, B
ITU-T G.993.5 Vectoring
Profiles: 8a/b/c/d, 12a/b, 17a, 30a
Band Plan: 997, 998, US0
IEEE 802.3ah (PTM)
ITU-T G.998.1/2/3 (Bonding)*

DSL parameters
Maximum attainable bit rates
Actual achieved bit rates
Vendor code, revision
Actual bonded achieved rates
Interleave depth
Latency modes: fast, interleaved
Interleave delay
Data modes: ATM, PTM
Capacity (%)
Bit swapping
Signal-to-noise ratio (SNR) margin
INP
Output power
G.INP
Attenuation
Vectoring
Bits/bin
Modes: PTM, ATM, LOS, FEC, CRC, HEC
Attenuation/bin (Hlog/bin)
LATN per band
QLN/bin
SNR/bin
SATN per band

Test interfaces
VDSL2, ADSL 1/2/2+
Ethernet 10/100 MBit/s Management Port
Ethernet 10/100/1000 MBit/s Test Port

Encapsulation methods
RFC 2684 supporting bridged Ethernet (IPoE) PPPoE (RFC 2516)
IPoA (RFC 1577) PPPoA/LLC and PPPoA/VC-MUX (RFC 2364)

Operating modes
DSL Terminate
Modem Replacement (DSL to Ethernet) Pass Through
Ethernet Terminate
Ethernet/Ethernet Pass Through

Login format
User name and password using PAP/CHAP

Connectivity support
LAN/WAN status VLAN ID, VLAN tagging
DNS, gateway VPI/VCI
DHCP client/server, DHCP vendor class IP release
NAT Signal Strength

Ping test
Ping destination: Gateway, IP adress or URL
Number of pings: 1 to 99
Packet size: 32 to 1200 bytes (default is 32)
Timeout: 1 to 10 seconds
Results: Packets sent/received, average round-trip delay (ms)

Traceroute test
Traceroute destination: Gateway, IP adress or URL
Timeout: In seconds, default is 1 s, maximum is 10 s
Packet size: 32 bytes
Number of hops: 1 bis 32 1 to 32 (default is 30)
Results: Indicates IP address of hop and round-trip time in milliseconds (ms)

FTP/HTTP speed test
Address: IP or URL
Direction: Upload and/or download
Results: Time, kB transferred, speed in kbit/s
Bookmarks: User-definable

Software options
Web Access
IPTV tests
VoIP tests

Interface options
xDSL Bonding Interface*
SHDSL 8-Wire-Interface
KECT3 Coppertest Interface for Line Qualification with DMM
TDR finds and localices cable faults (only with KECT3)
SFP-Port for Copper, Fiber (second GbE-Port) or GPON (ONT), Inserts optional
ISDN Uk0 / S0 / POTS Interface
S2M Interface*

• further information on request

General Data
Display
3.5 " TFT-Display, RGB 240 x 320

Power Supply
Built-in LiPo battery < 4 hours in full test mode, charging time < 6 hours

Size
23 x 11/9 x 7 cm

Weight
850 g

Housing
High impact resistant ABS with drop protection